This category covers the complete D3A/D3C motor assembly that includes the bearings, armature, separator, flange, and carbon brushes.
Effective serial number 4378001 (D2) with a start date of March 1980 through serial number 4607199 and an end date of June 4th, 1982.
NOTE: Through serial number 4388125 and an end date of June 29th 1980, the R1405 motor was standard. From serial number 4388126 through 4607199, the R1767 was standard.
Effective November 1981, with serial number 4545550 through 4607199, the revised R1909 armature and R1910 field was used.
-
BEST SELLER!Screw, #8-32 x .48 Inch, Bearing Shield, D3/D2Item #: H308This screw holds the slinger ring and bearing shield into the motor housing when the old ones rust or become corroded. For use with the D2 model.Price: $0.46 USD
-
Terminal, Field, Power, D3/D2Item #:R1853Wire terminals for the leads that connect the field to the switch on all D3, D2, and model D motors.Price: $1.46 USD
-
Screw, Separator, D3/D2Item #:R3450Original factory screw (bolt) for the model D3A and D2 Rainbow. Designed to match the plastic separator that has a beveled edge around the center hole. This bolt under the head is chamfered to sit in this beveled pocket. Works with...Discontinued
-
Air Deflector, D3/D2Item #:R1424The air deflector is a common item to replace. This item is pressed into place so removal will damage and require a new install. Fits D3C, D3A, and D2A model Rainbows. Use the R747 flange to hammer this into the motor housing.Discontinued