This category covers the complete Rainbow E2 Type 12 motor / pump assembly that includes the bearings, gaskets, separator, rotor, and stator.
You will find all three versions of the E2 Type 12 model line and was installed in the Black, Silver, and e2 Gold series.
-
BEST SELLER!
Rope Seal, Motor, E2Item #: R11429This rope seal helps prevent air leaks within the motor base in all e2 two-speed motors. Replace during service to prevent reduced performance.Price: $1.33 USD -
Bearing, Lower, E2Item #:R1172612mm ball bearing that fits the two speed E2 Type 12 (Black, Silver, e2 Gold) Rainbow vacuum. Bearings receive the most wear and should almost always be replaced if you are servicing your machine.Regular: $14.50 USD
Online: $8.92 USD -
Bearing, Upper, E2Item #:R11414Screeching sounds from the motor may signify a needed replacement of this part. Factory OEM bearing for the two speed E2 Type 12 (Black, Silver, and e2 Gold) Rainbow vacuum. Bearings get the most wear and is an inexpensive...Price: $12.19 USD -
Washer, Wave, E2, v3Item #:R13940Finger spring version 3 waver washer that sits on top of the bearing adaptor assembly. This is one of the improvements with the clamped upper bearing design.Price: $1.40 USD -
Housing, Lower Motor, E2Item #:R11430The lower motor housing completes the bottom half of all e2 two-speed motors. It is compatible with the E2 Type 12 (e2 Black, Silver, Gold) models.Regular: $9.82 USD
Online: $6.04 USD -
Fan, E2Item #:R12702Impeller / motor fan for the two speed E2 Type 12 (Black, Silver, e2 Gold) Rainbow vacuum motor. This part should never need replaced. If it does, please refresh yourself with the owner's manual on the proper care and storage of your...Price: $4.62 USD -
Nut, Upper Bearing, E2Item #:H610Upper bearing nut for use on the version 3 "clamped upper bearing" design. If your motor does not have this part, then be sure to look at the schematics to confirm your motor version for the E2 Type 12 model.Price: $3.87 USD -
Rotor, E2, v3Item #:R13863Rotor assembly with threaded ends that came standard in the E2 Type 12 (Black, Silver (Late)) series Rainbow vacuum. This design is part of the "Clamped Upper Bearing" motor and is a major improvement over the other versions.Regular: $74.13 USD
Online: $45.62 USD -
Screw, Encoder, E2Item #:H597This screw holds the encoder in place on all e2 two-speed motor designs and attaches directly to the motor base.Price: $0.23 USD -
Screw, Field, E2Item #:H599Standard field screw for all E2 Type 12 model Rainbows and all three version motors. This screw should almost never need to be replaced under normal wear and tear. If it does due to rust or corrosion, then please read the owner's...Price: $0.33 USD -
Screw, Motor Housing, E2Item #:H598This motor housing screw is used on all model E2 Type 12 Rainbows and all three version motors. This screw goes through the Base/Bearing Sub Assembly and attaches to the Bearing Bracket. Early production this part was silver, but...Price: $0.23 USD -
Spacer, Lower, E2Item #:R11428This spacer helps keep all lower fans properly spaced in the motor to prevent the fans from hitting each other. It fits all e2 two-speed motors.Price: $2.83 USD
