Rainbow Vacuum E-2 (e SERIES™) Version 1 Main Housing Parts - Page 2

Water pan gasket for the early version E-2 (e SERIES™) Rainbow system. Effective through serial number 9230145 with an end date of March 16th 2000. This gasket is semi-permanent and almost never needs replaced. Only replace if...

Motor mount and water pan gasket for the single speed E-2 (e SERIES™) Rainbow vacuum. Works in combination with the R10534 water pan neck gasket. Effective serial number 9230146 with a start date of March 17, 2000. Previous version...

Motor gasket for the early version E-2 (e SERIES™) Rainbow system. Helps seal the motor to the water pan. Effective through serial number 9230145 with an end date of March 16th 2000. Works with the R7284 water pan...

Left baffle assembly for the E2 Type 12 (Silver, e2 Gold), and E-2 (e SERIES™) main housing assembly. Includes the R7141 latch spring, R7139 latch pin, and the R8063 latch. Obsolete item number is R7280 and may be stamped behind...

Right baffle assembly for the E-2 (e SERIES™) and the E2 Type 12 (Silver, e2 Gold) main housing that stores the separator wrench / brush. Does not fit the Black series (E2 Type 12) version. Includes the R7141 latch spring, R7139...

Exhaust vent plate for the model E2 Type 12 (Silver, e2 Gold) and E-2 (e SERIES™) Rainbow. This part has been improved over the years by first adding a cord wrap hook and then adding an opening behind the cord wrap hook to allow for...

Rear cover assembly for the early version E-2 (e SERIES™) Rainbow system. To replace this part, you need to remove four screws. Two behind the cord caddy assembly, and two at the bottom on unit. If you can remove the rear cover...

Cord caddy assembly for the R7384 rear cover assembly that fits version ONE model E-2 (e SERIES™). If you have to take four screws out of the rear cover assembly to replace your HEPA filter, then this IS the correct part.

Motor seal for the E-2 (e SERIES™) Rainbow system. This item has been improved to allow a better seal between the motor and main housing. This improvement works with the R7214 housing clamp. Look at all images close to see if it...

Housing clamp for the E-2 (e SERIES™) Rainbow system. This item has been improved to allow a better mount between the motor and main housing. This improvement works with the R7209 motor seal. Look at picture close to see if it...

Interlock switch for the E2 Type 12 (Black, Silver, e2 Gold), and E-2 (e SERIES™) Rainbow vacuum. This switch is used as a safety feature, so not to allow the Rainbow to turn on without the water pan attached.