PN-2E Version Two and Version One Power Nozzle Handle Kit

8 Foot PN-2E Electric Hose Assembly

This is a factory OEM electric hose for the PN-2E power nozzle.

This model power nozzle came with the E2 Type 12 (Silver, e2 Gold Series), and the E-2 (e SERIES™) Rainbow.

The original hose that came out in 1998 (Item number R8077) looks different compared to this current revised version.

The changes over the years have been for many benefits that include:

• Better couplings at the end of the hose to lessen stress when bending to prevent holes.
• Handle improvement for better ergonomics that helps reduce stress on the hand and wrist.
• Allowing for water pick up for use on the new AquaMate shampoo systems. With this new hose design, it will allow you to use the new AquaMate AM-12 Silver.

This version came out with power nozzle serial number for the domestic market 7919600 and international market serial number 5978472.

Rainbow Genuine Switch Actuator, Model PN-2E, v2 and v1

This actuator assembly is used on the 1st and 2nd version E-2 (e SERIES™) PN-2E power nozzles. It allows you to control the power being supplied.

Switch actuator or trigger for the early version PN-2E electric hose handle assembly. This part sometimes will have R11091 x (x being a random number) on the side of it. Early versions of this item used a spring instead of the plastic arm. The part number R7803 was sometimes stamped on this version as well.

If you have the design with the plastic arm, then this part breaks easily. You can upgrade to the R5975 switch actuator and R6893 actuator spring located under the "Related Items" tab above. The R5975 uses a spring that will not break.

Switch, Handle, PN2E/PN2

Electric hose switch that fits in the PN-2E and PN-2 power nozzle.

E-2 (e SERIES™) Rainbow Power Nozzle Receptacle

Power nozzle receptacle for the original PN-2E and Gold version electric hose assembly. Also fits the main unit E-2 (e SERIES™) face plate assembly.

Screw, #5 x .50 Inch

This small black screw fits all the electric hose handle assemblies from 1990 through current production.

It also fits the newer design AquaMate I system as well as the first and second version PN-2E and PN-2 upright lock clip.