E-2 (e SERIES™) Version One Screw Design Inner Flange

30 Foot Standard Hose Assembly, E2 Type 12 and (e SERIES™)

Want to just place your Rainbow in the center of the house?

You should be able to reach everywhere with this. If you don't have carpet and have a lot of bare floors, you can use this as your everyday hose.

This standard OEM factory non-electric hose fits all E2 Type 12 and E-2 (e SERIES™) model Rainbow systems. This hose DOES NOT have electric connections and will not work with the power nozzle. It is for use with the standard attachments and wet pickup.

Rexair has tested and shown only a 10% loss of airflow compared to the standard 8 foot hose.

E-2 (e SERIES™) and PN-2E Hose Coupling Seal

This item fits on the end of the original version standard hose for the E-2 (e SERIES™) model Rainbow and original version PN-2E power nozzle electric hose.

This seal helps prevent air leaks when connecting the end of the hose to the front of the Rainbow intake. If your hose coupling seal has a tear or a piece missing, then replace it to ensure maximum performance.

For the PN-2E electric hose, this item was effective serial number 7000000 with a start date of August 5th 1998 through serial number 7651457 and an end date of April 12th 2004.

Screw Design Hose Coupling Latch

Hose coupling latch for the screw design hose coupling assembly.

If your hose coupling does not have screws to take apart, then this is not the correct part you need. Look in the "Related" tab to view other options.

E-2 (e SERIES™) and PN-2E Screw Design Hose Coupling Spring

E-2 (e SERIES™) PN-2E electric hose and standard hose coupling spring for the screw together design.

This item was standard through serial number 9212911. R10628 hose coupling inner flange is a direct upgrade.

7 Foot Standard Hose Assembly, E2 Type 12 and (e SERIES™)

Factory OEM seven foot standard hose for all E2 Type 12 and E-2 (e SERIES™) systems. This hose is used for wet pickup as well as with the small attachments when used with an R8407 stainless curved wand.

The new design coupling has a flared end to help improve the flex life of the hose.

Even though it can be difficult, your old wand does remove from your standard hose. Use a hair dryer to heat up the rubber end of the hose to help remove with a twist and pull method.

14 Foot Standard Hose Assembly, E2 Type 12 and (e SERIES™)

Double the length of the standard 7 foot hose that comes with the Rainbow system. Very nice for reaching your ceiling fan without holding the unit and also nice for stairs so you can keep the Rainbow at the top or bottom of steps.

Fits all E2 Type 12 and E-2 version Rainbow systems. (Black, Silver, e2 Gold, e SERIES™)