Rainbow Vacuum E2 Type 12 Gold Series Hose - Dolly Parts

Hose coupling inner flange for both the standard and electric hose on the early E-2 (e SERIES™) Rainbow and PN-2E power nozzle.

Effective January 24th 2000, the latch springs on the hose coupling have been integrated into the hose coupling inner flange. This part is a direct replacement for the previous version.

When using the new inner flange to service hose assemblies produced prior to serial number 9212911 on the Rainbow non-electrified hose, and 7212293 on the power nozzle electrified hose, simply discard the metal springs and assemble as before.

Hose coupling kit for the non-electric screw design hose.

This item was effective through Rainbow serial number 1032475. The new design R8052 hose assembly has many different improvements over this hose and is worth looking into as a replacement.

Hose coupling kit for the non electric hose connection. If you did NOT remove screws to get this coupling removed from the hose, then this is the correct part.

Effective Rainbow serial number 1032476, this item has been redesigned with a new flared feature to improve the flex life of the hose.

This small black screw fits all the electric hose handle assemblies from 1990 through current production.

It also fits the newer design AquaMate I system as well as the first and second version PN-2E and PN-2 upright lock clip.

Hose coupling latch for the screw design hose coupling assembly.

If your hose coupling does not have screws to take apart, then this is not the correct part you need. Look in the "Related" tab to view other options.

This item fits on the end of the original version standard hose for the E-2 (e SERIES™) model Rainbow and original version PN-2E power nozzle electric hose.

This seal helps prevent air leaks when connecting the end of the hose to the front of the Rainbow intake. If your hose coupling seal has a tear or a piece missing, then replace it to ensure maximum performance.

For the PN-2E electric hose, this item was effective serial number 7000000 with a start date of August 5th 1998 through serial number 7651457 and an end date of April 12th 2004.

Factory OEM seven foot standard hose for all E2 Type 12 and E-2 (e SERIES™) systems. This hose is used for wet pickup as well as with the small attachments when used with an R8407 stainless curved wand.

The new design coupling has a flared end to help improve the flex life of the hose.

Even though it can be difficult, your old wand does remove from your standard hose. Use a hair dryer to heat up the rubber end of the hose to help remove with a twist and pull method.

Complete dolly assembly for the E2 Type 12 (Silver, e2 Gold) and E-2 (e SERIES™) Rainbow system.

Previous item numbers include R13443 (Silver Series) and R8048 (e2) and are replaced with this item. Some structured improvements around the latch area have been applied to strengthen and also prevent the latch from popping off easily.

Some manufacturing markings you may see include R11932 and R7320. These in most cases are stamped on the bottom rear area.

This dolly wheel came original with the E2 Type 12 (Silver, e2 Gold), E-2 (e SERIES™), and the D4C SE (Special Edition) Rainbow vacuum.

Be sure that it is not your dolly that is broken as many times the problem is with the dolly, not the wheel.

Dolly latch that matches the E2 Type 12 (Silver, e2 Gold) and E-2 (e SERIES™) model Rainbow. If this part breaks and needs to be replaced, then make sure that you have the spring that is installed underneath. Without the spring, the latch will not work properly.

This new version latch no longer has applique and has the Rainbow logo molded into the plastic.

This item is a direct replacement for previous version item numbers R13447 and R10259.

Heavy spring for the E2 Type 12 (Black, Silver, e2 Gold), and E-2 (e SERIES™) version Rainbow system dolly latch.