D4 Motor / Water Pan Gasket

Rainbow SE Separator Nut, Model D4/D3, v2

This standard separator nut for the R4100 separator comes factory standard on the model D4C SE (Special Edition) Rainbow. Do not use on the R312 separator that comes standard on the original D4C or older units.

Rainbow D4C 120 Volt Main Motor

Over the years the motor wears and sometimes it is best to service, other times it is best to replace. Depending on the overall condition and what problem you are experiencing, this decision is sometimes easier than others.

The current version motor has had numerous improvements and revisions over the years. From upgraded carbon brushes, nickel plated armature shaft, to a new spider design that works with the improved R4100 separator. If you currently do not have the R4100 "SE" version separator, then it might be a good idea to add that as well as an H555 separator nut. Both of these items are in the "Related" tab.

This motor is the original OEM factory motor for the model D4C SE (Special Edition) and D4C Rainbow vacuum.

Rainbow D4 and D3 Version 2 Separator

The separator is one of the most important parts on the Rainbow cleaning system. It throws the water back into the water pan and allows clean water washed air to travel up through the motor and out the exhaust. Be sure to take off and clean as it can become clogged with dirt and debris.

If your model is the D4C SE (Special Edition) with the R4101 spider, then this is the current revision. If you have a D4C or D3C, then you would also need to order the R4101 and H555.

All parts can be viewed by clicking on the "Related Items" tab above.