PN-2E Version 4 and 3 Power Nozzle Electric Cord

PN-2E Power Nozzle Version Four Manifold

Power nozzle version 4 manifold for the PN-2E snap together design.

Be sure to look very closely as this model has had several changes and this part is one of them. This is part of the revised design from the original PN-2E power nozzle but it still works with the original R8401 motor.

Confirm with your serial number and also check what type motor is installed in your power nozzle. Download the schematics to make sure all parts work together.

Effective serial number 7645116 with a start date of March 26th 2004 through serial number 7763129 and an end date of July 12th 2005.

Sole Plate, Rear, PN2E, v5/v4

Rear sole plate for the PN-2E Silver and Gold version snap together design. Works with both the R11675 manifold and the R12900 manifold. If you did not have to remove the rear wheels to disassemble your power nozzle, then this is the wrong part. Effective serial number 7645116.

PN-2E Version 5 Power Nozzle Electric Cord

Main power cord for the version five model PN-2E power nozzle. Plugs directly into and works with the R12918 motor design.

Effective serial number 7763130 with a start date of July 13th 2005 through current production. If your cord has the white connector that plugs into the motor, then this is an exact match.

This cord may have R7203 stamped into the end of the plug. This number is also stamped onto all the "Related Items" as well so you can NOT go by R7203 as a match.

Sole Plate, Front, PN2E, v5/v4

Front sole plate for the PN-2E Silver and PN-2E Gold version power nozzle snap together design.

Effective serial number 7645116 with a start date of March 26th 2004. Original item number for this design was R12660.

PN-2E Version 2 and 1 Power Nozzle Electric Cord

Original factory OEM electric power cord for the early version PN-2E power nozzle.

Effective serial number 7000000 with a start date of August 5th 1998 through serial number 7645115 and an end date of March 25th 2004.

This cord may have R7203 stamped into the end of the plug. This number is also stamped onto all the "Related Items" as well so you can't go by R7203 as an exact match.

PN-2 and PN-2E (Version 1-4) 120 Volt Motor

Original OEM factory motor for the early PN-2E and PN-2 power nozzle. Please review the schematics to confirm correct part. This part only comes with one wire as the other wire either comes directly from the power cord or direct from the wire harness.

Old Rexair factory part numbers were R8368, R5670, R5655, and R5570. This motor can be used in both the PN-2E screw together design as well as the early version snap together version.

Effective from serial number 6000000 through 7763129 and from manufacture date April 1994 through July 12th 2005.