This category covers the complete D3C motor assembly that includes the bearings, armature, separator, flange, and carbon brushes.
Effective serial number 4607000 with a start date of June 5th 1982 through serial number 5999999 and an end date of April 1986.
*Note: From serial number 4440000 (rough estimate) through serial number 454550, the "D3A" R1767 motor was standard. From 4545551 through 4607200, the revised R1909 armature and R2424 field was used.
-
BEST SELLER!Screw, #8-32 x .48 Inch, Bearing Shield, D3/D2Item #: H308This screw holds the slinger ring and bearing shield into the motor housing when the old ones rust or become corroded. For use with the D2 model.Price: $0.46 USD
-
Spacer, Motor Fan, D3Item #:R2107Small spacer the fits under the motor cooling fan that is held down by a snap ring.Price: $0.85 USD
-
Spacer, Upper, D3Item #:R1984Upper spacer for the R2104 motor in the model D3C Rainbow vacuum. This spacer is shorter than the bottom spacer and is the last item to install before the shaft nut.Price: $1.85 USD
-
Clip, Stage Asm, D3/D2Item #:R1423Stage assembly clip for the R2104 that came original in the model D3C Rainbow. The R2104 is the replacement motor for the D3A, D2A, D2, and D models.Price: $2.24 USD
-
Air Guide, D3/D2Item #:R1418Air guide for the model D3C, D3A, and late version D2A model Rainbow. First stationary fan that fits on the bearing plate.Price: $3.34 USD
-
Stage, Lower w/ Ground, D3/D2Item #:R1752Lower stage fan on the R2104 bypass motor design that includes a threaded hole for a ground screw.Price: $23.40 USD
-
Stage, Middle, D3/D2Item #:R1419This motor originally came with the model D3C Rainbow. It is now the standard motor replacement for all D3C, D3A, D2, and D models.Price: $20.41 USD
-
Stage, Upper, D3/D2Item #:R1421Upper stage fan assembly for the bypass motor design on the D3C, D3A, and D2A model Rainbow. This part may have R1422 stamped into the top and can be used to confirm this is the correct item.Price: $17.06 USD
-
Field (R1974), 120v, D3Item #:R2424Factory OEM field for the model D3C and late version D3A. Will work with the R1974 armature and R1909 armature.Price: $26.24 USD
-
Insulator, Field, D3/D2Item #:R1454Insulation that is located around the field inside the motor housing for the D3C, D3A, and D2A model Rainbow.Price: $1.97 USD
-
Clamp, Wire, D3/D2Item #:H487This wire clamp is used on the D3C, D3A, and D2A bypass motor design. It clips onto the field wire inside the motor housing and is pushed down beside field and housing to keep wire in place.Price: $0.20 USD
-
Terminal, Field, Power, D3/D2Item #:R1853Wire terminals for the leads that connect the field to the switch on all D3, D2, and model D motors.Price: $1.46 USD
-
Spider, D4/D3, v1Item #:R1976This item has been discontinued and must be replaced with the improved design R4101. The spider sets under the separator and works directly with the separator. The R4101 spider and the R4100 separator was one of the upgrades when the...Discontinued